slitter machine maintenance is crucial: Slitting machine is a high-performance system that runs at speeds up to 2,000 feet per minute and is intended to produce 24 hours a day, 365 days a year. For these reasons, Slitting Machine Maintenance is crucial and represents a titanic effort if they don’t understand what components are critical.
Recommended Routine Maintenance
Coil processors need to develop routine Slitting Machine Maintenance procedures for these critical areas of a slitting line.
Oil
Oil flows at approximately 60 to 120 liters per minute at a pressure of 120 kilograms per square centimeter. Over time small dirt particles turn oil into a dangerous agent that can scratch pipes and cylinder inner walls and block solenoid valves and joints. Dirty oil also can damage seals.
Filter
Another potential contaminant is a dirty filter. Filters, which can be mechanical, electrostatic, or cloth, should be checked every 600 hours.
Pump
Pumps should be checked every 2,000 hours to ensure that the right pressure and flow are achieved and bearings lubricated and cleaned thoroughly. The hydraulic tank should be cleaned every 1,500 hours. All sludge must be removed from the bottom of the tank with a cleaning and washing agent. Line pressure in the hydraulic circuit must be released before maintenance to prevent a sudden oil shower.
Electric Motors
Many operators assume that electric motors do not require maintenance, especially AC motors. Not true. All motors require some sort of periodic maintenance.
If clean air can’t flow freely through the motor, its temperature increases and performance decreases.
For example, keeping dirty filters clean extends the life of a motor. If clean air can’t flow freely through the motor, its temperature increases and performance decreases.
Lubricating main shaft bearings also extends a motor’s life. Shaft bearings should be greased every 2,000 hours. During this operation, all dirt inside the motor should be removed and damaged seals replaced. All power must be switched off before motor maintenance is performed.
slitter machine maintenance will increase your machine health and quality and as a result your income! So pay close attention and never forget to maintain a healthy state for your machines.
You can contact TM Group for more information or purchase necessary machine parts from PrintMachine.Market
